How 3D printing works
The principle of 3D printing in brief: building in layers, the route from file to object, typical strengths and the main limitations.
As of November 2026
In 3D printing an object is created by building up material in thin layers, one on top of another. Specialists call it additive manufacturing, as opposed to milling, where material is removed. The basic idea dates from the 1980s. Since machines became affordable it has reached everyday life.
From idea to object
- Digital model. A 3D file describes the shape.
- Preparation. Software (a slicer) cuts the model into layers and defines how it will be printed.
- Printing. The machine builds layer upon layer. That takes minutes to many hours.
- Post-processing. Removing auxiliary structures, cleaning, smoothing or painting if required.
Why people use 3D printing
- No tool, no mould: a one-off is economically possible.
- A change costs only a new file.
- Shapes with cavities or undercuts are feasible.
- Production on demand, not for stock.
What not to expect
- The surface of a mass-produced product without finishing
- Low unit prices for very large quantities
- Equal strength in every direction for parts built in layers
- Automatic suitability for food, children's toys or safety-critical parts
Three misconceptions
"You scan a part and print it." A scan yields a shape, not a dimensionally accurate design. Technical parts are usually redesigned from scratch.
"The printer does it at the push of a button." Material, orientation and settings decide the result. It is a craft.
"3D printing is always expensive." Small plastic parts often cost less than the postage.
Continue with Processes and materials.