3D Druck DeutschlandBasicsProcesses and materialsWhat 3D printing costsAbout this siteDeutsch

Processes and materials at a glance

FDM, SLA, SLS and MJF plus the common plastics from PLA to nylon: what sets them apart and what they are suited to.

As of November 2026

The term 3D printing covers several techniques. For plastics, four abbreviations are enough to understand almost any quote.

The processes

FDM (also FFF) melts a plastic filament and lays it down in lines. Inexpensive and versatile, with visible layer lines. The standard for housings, brackets, spare parts and large objects.

SLA (also resin printing) cures liquid resin with light. Very fine detail and smooth faces, but more brittle. Typical for figures, jewellery and dental models.

SLS fuses plastic powder with a laser. Robust nylon parts without supports and a slightly rough surface. Strong for complex shapes and series.

MJF works with powder much like SLS but fuses it across the whole layer using heat. Widespread in industrial small-series production.

Metal has processes of its own, which cost considerably more and are used mainly in industry.

The materials

Plastic Process Property in one line
PLA FDM easy, dimensionally true, not heat-resistant
PETG FDM tough and moisture-resistant
ABS / ASA FDM heat-resistant and (ASA) weatherproof
TPU FDM elastic like rubber
PA12 (nylon) SLS, MJF, FDM durable and abrasion-resistant
Standard resin SLA detailed, smooth, brittle
Engineering resins SLA tough, flexible or heat-resistant depending on type

How to narrow it down

  1. Does it mainly have to be cheap and fast? FDM.
  2. Does a fine surface count? SLA.
  3. Must it take a lot of stress, or are there many parts? SLS or MJF.
  4. Outdoors or in a car? ASA or PA.
  5. Soft? TPU.

If you are unsure, describe the intended use to the provider and leave the material open. Good providers will then make a suggestion themselves.

Continue with Files and models.