3D printing lexicon: over 70 terms from A to Z
The reference for 3D printing: processes, materials, printer components, slicer terms and file formats, each explained briefly and clearly.
As of November 2026
3MF – A modern print format holding units, colour and settings.
ABS – An impact-resistant, heat-resistant plastic. Needs an enclosed build chamber.
Additive manufacturing – The technical term for 3D printing: making things by adding material.
Annealing – Heat treatment after printing.
ASA – A weather- and UV-resistant relative of ABS.
Bed levelling – Aligning the build plate to the nozzle, usually automatic today.
Binder jetting – A process in which powder is glued together with a binder.
Bowden extruder – A feed unit that pushes filament through a tube to the print head.
Bridge – A line spanned freely between two supports.
Brim – A flat rim around the part for better adhesion.
Build plate / print bed – The surface the part is built on.
Build volume – The largest size a machine can print.
CAD – Computer-aided design.
Calibration – Tuning the printer to material and dimensions.
CoreXY – A design in which the print head moves in two axes and the plate only in height.
Direct extruder – A feed unit mounted on the print head.
DLP – Resin printing with a projector as the light source.
Elephant's foot – Widening of the first layers.
Extruder – The unit that feeds the filament.
FDM / FFF – Fused deposition modelling with plastic filament.
Filament – Plastic wire used as feedstock, usually 1.75 mm thick.
Firmware – The printer's control software.
Flow rate – The amount of material fed relative to the target.
G-code – The command language that controls the printer.
Ghosting – A ripple pattern caused by vibration.
Glass transition temperature – The temperature from which a plastic softens.
Gyroid – An infill pattern with even strength in all directions.
Hotend – The heated part of the print head.
Infill – The lattice structure inside a part.
Ironing – Smoothing the top face by passing over it again.
Isopropanol – An alcohol for cleaning build plates and resin parts.
Laser melting – A metal process in which a laser melts powder completely.
Layer height – The thickness of a single printed layer.
LCD / MSLA – Resin printing with a screen as a mask.
Mesh – The triangle network describing a model's surface.
MJF – Multi Jet Fusion, a powder-bed process with full-layer exposure.
Nozzle – The opening the molten material leaves through.
OBJ – A file format that can also store colours and textures.
Orientation – The position of the part in the build volume. Affects strength, surface and supports.
Overhang – An area projecting beyond the layer below.
PA (polyamide, nylon) – A tough, wear-resistant engineering plastic.
PC (polycarbonate) – A very impact-resistant, heat-resistant plastic.
Perimeter (wall line) – An outer line of a part.
PETG – A tough, moisture-resistant all-round plastic.
PLA – An easy-to-print standard plastic from renewable raw materials.
Post-curing – UV treatment of resin parts after printing.
Powder bed – The layer of powder in which the part forms in SLS, MJF and laser melting.
Raft – A printed base under the part.
Rapid prototyping – Building samples quickly.
Resin – Liquid plastic that cures under UV light.
Resolution – The smallest unit that can be reproduced: layer height vertically, nozzle or pixel size in the plane.
Retraction – Pulling the filament back during travel moves to prevent stringing.
Reverse engineering – Redesigning an existing part.
Seam – The start and end point of each layer.
Shore hardness – A measure of the hardness of flexible materials.
Shrinkage – Contraction of the material as it cools.
Sintering – Bonding powder with heat below the melting point.
Skirt – An outline for priming the nozzle.
SLA – Stereolithography, resin printing with a laser.
Slicer – The program that converts models into print paths.
SLS – Selective laser sintering of plastic powder.
STEP – An exchange format for exact design data.
STL – A widespread file format describing the surface as a triangle mesh.
Stringing – Fine strings between separate areas.
Support – Auxiliary material under overhangs.
Threaded insert – A metal sleeve with an internal thread, set by heat.
Tolerance – The permitted deviation from the nominal dimension.
TPU – A flexible, rubbery plastic.
Tree support – A branching support that saves material and comes off easily.
Under-extrusion – Too little material fed, visible as gaps.
Vase mode – Printing in one continuous spiral with a single wall.
Warping – Distortion in which corners lift off the plate.
Watertight (model) – A closed mesh without holes, a requirement for printing.
Our own service: Shorter term lists for each purpose are on 3D Druck Berlin (glossary) and Brandform (terms in plain language).
More topics
- How long does it take?Print time, delivery time and what affects both.
- ApplicationsWhere 3D printing is used in practice today, by sector.
- HistoryThe main milestones from the first patents to today.
- LawWhat you may print, share and sell, in outline.
- Safety and healthEmissions, resin, heat and fire protection, put in perspective.
- SustainabilityWhere 3D printing saves resources and where the promises are too big.
- FAQ30 short answers to the questions beginners ask most.