Metal 3D printing: processes, alloys and cost
Laser powder-bed fusion, binder jetting and directed energy deposition explained, plus common alloys, post-processing and an honest view of cost.
As of November 2026
Metal parts can be built layer by layer too. The processes are technically demanding, the machines expensive and the finishing extensive. Metal 3D printing therefore pays off where the shape could not be milled or cast, or only with great effort.
The three main processes
Laser powder-bed fusion. A laser melts metal powder completely, layer by layer, under shielding gas. The process goes by several names (LPBF, SLM, DMLS). It yields dense, high-strength parts with fine detail and is the most used metal process.
Binder jetting. A print head glues metal powder together with a binder. The resulting "green part" is then sintered in a furnace and shrinks by about 15 to 20 percent. The process is faster and cheaper in series but does not quite reach the density of laser melting.
Directed energy deposition (DED). Powder or wire is fed into a melt pool created by a laser or arc. Suited to large components and repairs, with a coarse surface.
There are also metal filaments for FDM printers, which must be debound and sintered after printing.
Common materials
| Material | Property | Typical use |
|---|---|---|
| Stainless steel 316L | corrosion-resistant, tough | fittings, food technology, medical |
| Tool steel | hard, wear-resistant | mould inserts with cooling channels |
| Aluminium AlSi10Mg | light, good thermal conductivity | housings, lightweight design, heat sinks |
| Titanium Ti6Al4V | very strong for its weight, biocompatible | implants, aerospace |
| Nickel-based alloys | heat-resistant | turbines, exhaust components |
| Cobalt-chrome | hard, corrosion-resistant | dental work |
What happens after printing
- Stress relief annealing, because melting creates internal stresses
- Cutting off the build plate, usually by sawing or wire erosion
- Removing supports, which in metal are welded on firmly
- Machining of functional faces, threads and fits
- Blasting, grinding or polishing the surface
Post-processing often accounts for more than half the total cost.
Typical values for laser melting
| Quantity | Usual range |
|---|---|
| Layer height | 0.02 to 0.06 mm |
| Dimensional tolerance | about ±0.1 to ±0.2 mm |
| Minimum wall thickness | 0.4 to 1 mm |
| Surface roughness | considerably rougher than milled |
When metal 3D printing is worth it
- internal channels, such as conformal cooling in tools
- lightweight design with lattice structures
- several components merged into one
- one-offs and small series in expensive materials
- patient-specific implants
When it is not
A simple bracket, plate or turned part is always cheaper milled or turned. Large quantities of simple geometry belong in casting or machining.
Putting cost in perspective
A fist-sized stainless steel part quickly costs a three-digit sum, and more in titanium. The drivers are build height, volume, support effort and finishing. To save money, design for few supports and machine only the faces that really matter.
FAQ
Are printed metal parts as strong as forged ones?
With correct process control and heat treatment, laser-melted parts reach strengths in the range of cast or rolled materials. For safety-critical parts, testing and certification are usual.
Can I print metal at home?
Practically not. Metal powder is harmful to health and partly flammable, and the machines need shielding gas and extraction. Metal filaments can be printed, but sintering requires a special furnace.
More topics
- FDM / FFFPlastic filament is melted and laid down in lines. The most widespread process.
- SLA / resinLiquid resin is cured with light. For the finest detail and smooth faces.
- SLSA laser fuses nylon powder. Durable parts without supports.
- MJFPowder is fused across the whole layer with ink and heat. Fast and series-ready.