TPU: flexible filament for seals, bumpers and sleeves
TPU in 3D printing: what Shore hardness means, how to tune flexibility through wall thickness and infill, and what to watch when printing.
As of November 2026
TPU (thermoplastic polyurethane) is an elastic plastic. Printed TPU parts feel like hard rubber, can be bent and compressed, and return to their shape.
Understanding Shore hardness
The hardness of flexible materials is given in Shore A. The lower the number, the softer.
| Shore A | Feels like | Printability |
|---|---|---|
| 95A | shopping trolley wheel, shoe heel | good, the standard material |
| 90A | skateboard wheel | good |
| 85A | shoe sole | medium |
| 75A and softer | eraser | demanding |
Flexibility also depends on the design
A part in 95A TPU can be stiff or soft, depending on how it is built:
- Wall thickness: thin walls bend easily, thick ones hardly at all
- Infill density: 10 percent gives a cushion, 100 percent a hard block
- Infill pattern: gyroid springs evenly in every direction
This lets you set the hardness of a part without changing material.
Key values
| Property | Guide value |
|---|---|
| Nozzle temperature | 220 to 240 °C |
| Bed temperature | 40 to 60 °C |
| Elongation at break | 400 to 600 % |
| Abrasion resistance | very high |
| Resistance | good against oil and grease |
Strengths
- tear-resistant and very abrasion-resistant
- damps shocks and vibration
- excellent layer bonding; parts do not split along layers
- resists oils and many chemicals
Weaknesses
- slow to print
- fine detail and tight tolerances are not possible
- strings, and supports are hard to remove
- absorbs moisture quickly
- soft grades can only be fed with a suitable extruder
Design notes
- avoid overhangs where possible, since supports come off badly
- minimum wall thickness 1 mm, 0.8 mm for sealing lips
- plan fits with more clearance; the material gives
- dimensions are less accurate than in rigid plastics: expect ±0.5 mm
What TPU suits
Seals and washers, bumpers and edge protection, equipment feet, cable grommets, protective sleeves, grips, straps, tyres for model vehicles, dampers for drones and cameras.
FAQ
Is TPU watertight?
With enough wall thickness and a dense print, yes. It works well as a flat gasket; it is not meant for pressure lines.
Can TPU be combined with rigid plastic?
Multi-material printers can join hard and soft areas in one part, such as a firm handle with a soft pad. Adhesion depends on the material pairing.
Our own service: 3D Druck Berlin prints flexible TPU parts such as seals and bumpers as rebuilds. Send a photo with dimensions: replace a broken part.
More topics
- PLAThe standard plastic for beginners: easy, accurate, not heat-resistant.
- PETGTougher and more heat-resistant than PLA, moisture-resistant, a little more demanding.
- ABS and ASAFor heat, vehicles and outdoors. Needs an enclosed printer.
- Nylon, PC and fibre-filledEngineering plastics for high load, heat and wear.