3D scanning: from object to digital model
How 3D scanning works, which methods exist, what a scan can and cannot do, and how scan data becomes a printable model.
As of November 2026
A 3D scanner captures the surface of an object and produces a digital mesh. That sounds like the perfect first step to 3D printing, but it has clear limits.
The methods
| Method | Principle | Strength | Weakness |
|---|---|---|---|
| Photogrammetry | many photos; software computes the shape | cheap, works with a phone, large objects | scale has to be set afterwards |
| Structured light | a light pattern is projected and captured by cameras | accurate, fast | sensitive to shiny surfaces |
| Laser scanner | a laser line sweeps the surface | very accurate, large parts too | expensive |
| Phone depth sensor | measures distances | available instantly | coarse, for rooms and large shapes |
| Computed tomography | X-ray, captures the inside too | internal geometry | laboratory only |
What a scan does well
- capturing organic shapes: figures, body parts, sculptures
- taking off free-form surfaces, such as a car body contour
- serving as a template to fit a new part against
- documenting the actual state and comparing it with the design
What a scan cannot do
- Deliver a dimensioned design. A scan is a mesh of millions of triangles. A hole in it is not an 8 mm hole but a roughly round depression.
- Capture the inside. Undercuts, cavities and hidden faces are missing.
- Subtract wear. A worn or broken part is scanned as it is.
For technical spare parts, the part is therefore usually redesigned using the scan or direct measurement. This is called reverse engineering.
Difficult surfaces
Shiny, transparent and very dark surfaces disturb most scanners. A matting spray that evaporates without residue or washes off solves this.
From scan to print
- Scan from all directions.
- Align and merge the individual scans.
- Close holes, smooth noise.
- Simplify the mesh so the file stays manageable.
- Check the scale.
- Export as STL, OBJ or 3MF.
When a scan is worthwhile
For figures, casts and free-form surfaces, almost always. For an angular plastic part with holes, measuring with callipers is faster and more accurate.
FAQ
Is a smartphone enough for scanning?
For decorative objects and rough shapes, yes. For fits to a tenth of a millimetre, no.
May I scan and reprint any object?
For private use a great deal is permitted. As soon as you distribute or sell protected designs or branded products, intellectual property rights apply. See the page on legal questions.
Our own service: For dimensionally accurate spare parts 3D Druck Berlin works from photos, measurements or the original sent in, not from scans: spare parts. For objects from an image see Brandform: all I have is a photo.
More topics
- Design rulesGuide values for walls, overhangs, holes, lettering and joints.
- Tolerances and fitsWhat accuracy is realistic and how to design fits.
- Slicer settingsWhich setting does what, and where to start.
- Post-processingFrom raw print to finished part: sanding, painting, gluing, inserts.
- Fixing print defectsThe typical faults, their causes and what helps.
- CAD programsFrom browser building blocks to parametric CAD: what suits whom.
- The first printFrom unboxing to the first successful part.
- Buying a 3D printerDesigns, features, price classes and running costs, without brand advertising.
- Finding modelsWhere ready-made 3D models are and how to spot good ones.