3D Druck DeutschlandProcessesMaterialsPracticeLexiconFAQOur servicesBasicsWhat 3D printing costsAbout this siteDeutsch

Tolerances and fits in 3D printing

What dimensional accuracy FDM, SLA, SLS and MJF achieve, where deviations come from and how to design fits that work on the first print.

As of November 2026

No manufacturing process hits a dimension exactly. What matters is knowing the usual deviation and designing around it.

Usual tolerances

Process Typical deviation
FDM (home machine) ±0.2 to ±0.5 mm or ±0.5 %
FDM (industrial) ±0.15 to ±0.3 mm
SLA ±0.1 to ±0.2 mm or ±0.5 %
SLS ±0.3 mm or ±0.3 %
MJF ±0.2 to ±0.3 mm or ±0.3 %
Laser melting, metal ±0.1 to ±0.2 mm

The larger value applies in each case. For a part 200 mm long at ±0.5 %, that is ±1 mm.

Where deviations come from

Designing fits

For FDM with a 0.4 mm nozzle these gaps between two parts have proved themselves:

Fit Gap per side
Press fit, pressed in 0 to 0.05 mm
Interference fit, holds by itself 0.1 mm
Sliding fit, assembled by hand 0.2 mm
Loose fit, moves freely 0.3 to 0.4 mm
Moving parts printed in place 0.4 to 0.5 mm

SLA allows smaller gaps; SLS needs slightly larger ones.

The test print

Before printing a large part, a small sample containing only the critical feature is worthwhile: the hole, the slot, the snap hook. With three variants 0.1 mm apart, the right one is found quickly. It costs little and saves a failed print.

Specifying dimensions properly

If it has to be more accurate

FAQ

Is an expensive printer automatically more accurate?

Partly. Industrial machines are more repeatable. The limits set by shrinkage and layer build-up apply to all of them.

Why does a part fit today and not on the next print?

A different filament batch, different humidity, a different position on the plate or a different orientation shift the result by tenths of a millimetre. For series, these parameters are fixed.

Our own service: The tolerances 3D Druck Berlin commits to and the finishing it offers are under tolerances, surfaces and finishing. For series see small series.

More topics